• Aucun résultat trouvé

Electromechanical Resonant Ice Protection Systems: Numerical Investigation through a Phase-Field mixed Adhesive / Brittle Fracture Model

N/A
N/A
Protected

Academic year: 2021

Partager "Electromechanical Resonant Ice Protection Systems: Numerical Investigation through a Phase-Field mixed Adhesive / Brittle Fracture Model"

Copied!
30
0
0

Texte intégral

Loading

Figure

Figure 1: Electromechanical de-icing systems: (a) the analytic beam studied in [ 20 , 22 ] and re-used in this paper as a test case; and (b) position h n
Figure 2: The two possible kinds of fracture: cohesive in the ice layer or adhesive (delamination) at the ice-substrate interface
Figure 3: Illustration of a cracked material.
Figure 4: Two solids Ω 1 and Ω 2 with a common adhesive interface Γ 2 modelled by microscopic bonds.
+7

Références

Documents relatifs

(voir section 9.4.2.a et figure 9.11 pour une description du protocole de terrain) et de la surface avec une précision centimétrique. En revanche, même si ces méthodes sont déjà 2 à

L’accès à ce site Web et l’utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D’UTILISER CE SITE

Enfin la micro albuminurie a été identifiée comme marqueur probable du risque de rétinopathie ou de neuropathie diabétique (Isnard Bagnis, 2006).. L’intérêt du dosage de la

هإ د ءا ىلإ يدهج ةرمث يدها ׃ نيميركلا نيدلاولا ااركش و ديعب وا بيرق نم ةدعاسملا دي يل مدق نم لك ىلا و مويلا نيرضاحلا عيمج و ميكحلا دبع يرشم.. ءادهإ

The observation of all-optical helicity-dependent switching (AO-HDS) in ferri- and ferro-magnetic materials depends not only on the saturation magnetization, but on the magnetic

To achieve this statistical step, it is possible to rely on ProStaR, which allows the user to (1) load correctly formatted data, (2) clean them by means of various filters,

We used three different data sources: annotation files (from EMBL/GenBank/DDBJ), IMGT/LIGM-DB annotated flat files [8], and the T cell receptor FactsBook [2]. For each source,

Pulsed experiments typically are at full load a very small percentage of the lifetime of the experimental program. Even though FIRE and IGNITOR are resistive machines, they are